Js532/533/534 high performance – ball head – general – 2-4 blade

Blade band support, unique precision machining properties, M64 plating

ISO P, M, K, S, N

Dc 6-32 mm, blade tip arc

Cylindrical, Weldon side fixed, 1 kind of length

Js532/533/534 high performance – ball head – general – 2-4 blade

Real blade circular arc, radial chip, NXT coating

ISO P, M, K, S, N

Dc 1-20 mm, 0.0313-0.75 in, ball head

Cylindrical, Weldon side fixed, 3 kinds of length

JGHP951/993 high-performance – square shoulder – steel – 3-6 blade

Designed for high material cutting rate, curved spiral, rough profile

ISO P, K

Dc 3-25 mm, blade tip arc and chamfer

Cylindrical, Weldon side fixed, Safe- Lock, 2 kinds of length

JGHP994 high-performance – CoCr and titanium – squared roughness – 4 flute

Rough profile, neck shrinkage, polishing HXT coating

S3, speed 12

Dc 6-10 mm. Chamfer

Cylindrical, length 1

JGHP750 – high-performance – square-stainless titanium and superalloy – 2-3-4 flute

Differential pitch, define flute shape, Angle relief

ISO – M, s

Dc 8 to 20 mm, the cornerradius

Cylindrical, Weldon 2 length

Jghp76/77/780 high-performance – high – side – high – temperature alloy – 4-5 blades

Designed for high material cutting rate, different tooth spacing, directional cutting edge design

ISO S, M

Dc 4-25 mm, 0.5-1 in, edge arc

Cylindrical, Weldon side fixed, Safe- Lock, 2 kinds of length

JGHP170 high-performance – square shoulder – hardened steel – 3-4 blades

High strength core design, shorter blade length, M64 coating

ISO H

Dc 2-20 mm, blade tip arc and chamfer

Cylindrical, Weldon side fixed, 1 kind of length

JGHP490 high-performance – square shoulder – aluminum – 2-3 blades

Rough profile, internal cold channel, directional cutting edge design

ISO N

Dc 10-25 mm, blade tip arc

Cylindrical, Weldon side fixed, Safe- Lock, 3 lengths

JHS452/453 high-performance – square shoulder – aluminum – 2-3 blades

Blade support, directional cutting edge design, HEMI plating

S335 – high-performance – square shoulder

General products can provide comprehensive processing flexibility with excellent cost performance.

After optimization of end milling cutter is dedicated to mass processing of single parts need to original equipment manufacturers and their suppliers, they need comprehensive optimization of technological process to shorten the production cycle, parts cost per unit is minimized.

S335 – high-performance – square shoulder and ball head – general – 3 blades

AlTiN coating

ISO P, M, K, S

Dc 0.125-1 in, blade tip arc, ball head

Cylindrical, Weldon side fixed, 2 kinds of length

S545 – high-performance – square shoulder – common – 5 blades

Radial chip, AlTiN coating

ISO P, H, M, K, N, S

Dc 0.125-1.25 in, 4-12 mm, sharp, blade tip arc

Cylindrical, 6 lengths

A245 – high-performance – square shoulder – aluminum – 2 – blade

Cylindrical blade band, TiCN coating

ISO N

Dc 0.125-1 in, sharp, knife-edge, ball head

Cylindrical, four lengths

A345 – high-performance – square shoulder – aluminum – 3 blade

Cylindrical blade band, TiCN plating

ISO N

Dc 0.125-1 in, sharp, knife-edge

Cylindrical, four lengths

JS553/JS554 high-performance – square shoulder – general – 3-4 blades

Double core, different pitch, SIRA coating

ISO P, M, K, S, N

Dc 2-25 mm, 0.125-1 in, edge arc, chamfering and sharp

Cylindrical, Weldon side fixed, 2 kinds of length

JS520 high-performance – square shoulder – general – 5-8 blade

Multi-blade, different pitch, NXT plating

ISO P, M, K, S, N

Dc 4-25 mm, chamfer

Cylindrical, Weldon side fixed, 2 kinds of length

Js7720/730 high-performance – square shoulder and ball head – titanium alloy – 6 blades

Different pitch, radial chip, HXT coating

ISO S, M

Dc 6-25 mm, blade tip arc and ball head

Cylindrical, Weldon side fixed, Safe- Lock, 2 kinds of length

JS522 high-performance – square shoulder – general – 2 blade, high shoulder

Minimaster small magic king series can replace the cutter head milling cutter

Minimaster small magic king series can replace the cutter head milling cutter including a series of products for the determination of drilling and chamfering. Please use the product filter to learn about this product area.

Minimaster magic king mill – concave arc

Scope: 12 mm

2 blade, 1 material grade

1- mm, 2-mm and 3-mm blade radius

Minimaster magic king mill – knife – pole

Model: keyway, straight and cone (1 taper, 3 taper, 5 taper and 10 taper)

Steel and Densimet  models

Maximum 194 mm suspension length (MM16)

Solid end mill

Mountain high has comprehensive comprehensive hard alloy and hss-co end milling cutter, which can help you deal with many challenges easily. These vertical mills provide a variety of groove, material grades and coatings that allow you to cut any work piece material in the best way, such as aluminum alloys, special alloys, laminated composites, etc.

Whatever you need is available in a variety of conditions with high productivity in general, still need may be in very specific applications to provide the highest productivity of the special cutting tools, you all can be found in the mountain high overall vertical milling cutter series solution.

Solid carbide end milling cutter

Premium solid carbide end mill can provide unparalleled in the rigid parts machining cutting performance and long tool life and excellent security technology, suitable for aerospace, medical, mould industry, power generation, etc.

The end mill of high quality and low cost advantage arising directly from the special grain cemented carbide end mill structure, optimized blade length, professional edge grinding and abrasion resistant coatings.

High performance machining solid carbide end milling cutter

Shan gao provides a complete range of high-performance solid carbide square shoulder milling cutter, ball head milling cutter and finishing milling cutter to provide users with high productivity and long tool life. This series of tools covers a wide range of general products and a variety of optimized vertical milling cutters applicable to specific work piece materials.

When the blade is worn down, the user only needs to replace the blade, saving the cost of replacing the whole cutting tool and the time of re-grinding.

The Minimaster series includes a wide range of blades and knives, making it the most flexible mill in the industry. For each diameter between 6 to 20 mm, has more than 600 kinds of blades and cutter bar, and you can order different styles of blade, such as the less than the average size of the blade used for slotting, with sharp cutting edge or tip radius of circular arc side shoulder blade, pilot drill cut, 45 to 60 ° chamfer or double chamfer, high feed blade, 90-120 ° ball head models of milling and copying milling cutter.

For 3D milling, mountain high offers two kinds of Minimaster king products: 2 blades and 3 blades. The 3-blade can improve the productivity with higher feed, and the two-blade can reduce the vibration risk to the minimum.

Minimaster magic king mill shoulder

Range: 6-20 mm (0.25-0.75 in)

2 blade and 3 blade type, 4 material grade

Groove milling maximum cutting depth: 0.3 x Dc

3 blade type for general processing, 2 blade type for processing under unstable working conditions

Minimaster little demon king mill – ball head

Range: 6-20 mm (0.25-0.75 in)

2 blade or 3 blade type, 4 material grade

Slot milling recommended cutting depth 0.3 x Dc

3 blade type for general processing, 2 blade type for processing under unstable working conditions

Minimaster little Lord of the magic mill – high feed

Range: 8-12mm

2 blade, 2 material grade

Maximum cutting depth: 0.5mm (MM12)

Minimaster magic king milling cutters – insert milling

Range: 6-16 mm

2 blade, 1 material grade

The biggest step is 8 mm

Minimaster small demon king milling cutter – drill and chamfer Angle

Minimaster super small magic king – square shoulder

The five-blade and eight-blade model are recommended for contour milling.

The Minimaster super small demon king series has a diameter range of 10-16 mm (0.39 “-0.63”), which can provide flexible blades and a combination of knives and poles.

Minimaster super small magic king – square shoulder

Range 10-16 mm (0.375-0.625 in)

3 blade or 4 blade type, 2 material grade

Shorter cutting length (large cutting width and small cutting depth (<50%) preferred)

Longer cutting length (small cutting width and large cutting depth (<50%) preferred)

3 blade type, groove milling preferred

4 blade type, side milling preferred

Minimaster super little devil – ball head

Range 10-16 mm (0.375-0.625 in)

2 blade or 4 blade type, 2 material grade

Slot milling recommended cutting depth 0.3 x Dc

The blade type is used for general processing, and the 2-blade type is used for processing in unstable working conditions. The 4-edge type is used for optimized processing

All the cutting head can be used for finishing

Minimaster super small magic king mill – high feed

Range 10-16 mm (0.375-0.625 in)

3 blade, with internal cold channel, 1 material grade

Maximum cutting depth of 0.9mm (16 in diameter) (0.035 in)

The first choice of machining and processing of S material in unstable working conditions

Minimaster super little devil – knife – pole

Model: keyway, straight and cone (1 taper, 3 taper and 5 taper)

Steel and hard alloy models

Maximum 150 mm suspension length (MP16)

The metric system and the English pole

MINIMASTER

Minimaster is a unique and universal vertical milling system that can combine different solutions to achieve optimal work piece accessibility and maximum stability and security.

Flexible two-piece design tool rod and blades together, saving time and money, and create a universal tool, to provide users with solutions for almost all applications – whether it is need to reduce the amount of overhanging, achieve maximum stability or other requirements.

Replaceable tool head milling cutter

Replaceable tool head milling cutter

With the use of the mountain high replaceable tool head milling cutter, it is only need to replace the worn blade instead of the whole cutter, thus saving the cost significantly. They adopt a highly secure tool/knife bar interface to ensure stable performance in rough machining and semi-finishing operations. In addition, they can use multiple blades, increase flexibility, and minimize tool inventory.

MINIMASTER super little devil

The Minimaster is a new generation of vertical milling cutter products with replaceable blades. The replaceable blade cutter system is based on the successful experience of the industry-leading Minimaster small demon king system, which can reach the highest accuracy and productivity level.

The solid cutting tool/knife-bar interface enables the Minimaster super small demon king to cope with greater cutting force, thus allowing the vertical mills to provide greater metal cutting rates in rough and semi-finishing.

Minimaster is a cost-effective solution that allows users to replace worn blades instead of the entire cutter. In addition, the replaceable blade applicable to different tool bars also allows for higher cutting parameters, eliminating heavy grinding and ensuring consistent tool life.

The blade is replaced quickly and easily, because it is not necessary to remove the tool bar from the handle or machine tool, and it is not necessary to remeasure the whole part. After the blade is replaced, the axial and radial position remain the same, achieving the highest accuracy.

The Minimaster super little devil provides a two-edged, three-edged, four-edged, five-blade and eight-blade model that can process all types of material. The two-blade and three-blade model has an internal cooling channel, which can ensure accurate cooling and efficient discharge.

The four blade head USES a larger spiral Angle and shorter blade length (0.7 xD), which can significantly improve the stability. Whether in demanding applications, or at the end of the cutting tool is longer than the whole blade 5 axis machining of more frequent, more make the cutting head is especially suitable for the stability of the large amount of material removed.

end mill for stainless steel

Magic square slotting cutter – 6 cutting edges, double blade

Magic square slotting cutter – 6 cutting edges, double blade

Cutter range: 40-100mm (1.5-4 in)

Maximum radial cutting depth of 7 mm (0.275 in)

The radius of the blade is 0.8-1.6 mm (0.031-0.063 in).

Install the SCET12 blade insert cutter – 4 cutting edges, single side blades

Cutter range 32-160 mm (1.25-6 in)

Maximum radial cutting depth: 11 mm (0.433 in)

Diameter of 20-40 mm: 100-160 mm (0.787-1.5 in)

Blade tip arc radius of 1.2-3.1 mm (0.047-0.122 in)

Install the AP16 blade insert cutter – 2 cutting edges, single side blades

Cutter range: 40-125 mm

Maximum radial cutting depth 15 mm (0.590 in)

Range of radius of blade tip: 0.8-3.0mm (0.031-0.118 in)

Drilling and milling cutter

The high – height drilling milling cutter is a tool for milling blind hole and countersunk hole plane. The main benefits include smooth cutting, highly balanced tool to help reduce the spindle bearing wear, and through the central locking system tight system provide a high degree of security, all of these provide an economical solution.

Chamfer cutter

The high Angle milling cutter not only provides the same light cutting operation as the standard milling cutter, but also has the toughness and reliable performance. With the inner cold channel and 30 degrees, 45 degrees, 60 degrees and 75 degree Angle options, our chamfering cutter series can provide the Combimaster modularity, knife disc and seco-capto connections.

milling

Our extensive, innovative and powerful carbide end milling cutter, milling cutter and blade series are well known in the industry.

We provide a wide range of milling solutions to process all work piece materials – from soft steel to easy – to – processed aluminum alloys to hard – processed high-temperature alloys. Whatever your milling process, you will always find the solution you need. In addition, we provide comprehensive support to ensure that you choose the right tool to improve productivity and product quality.

high feed milling

We have a wide range of advanced milling solutions that can meet the needs of all applications. In addition, with the help of a knowledgeable and experienced team, you can seamlessly implement high feed milling technology to improve your productivity and competitiveness.

The face milling operation with high feed milling method is very suitable for creating a good platform for further processing or final processing. In most applications, you usually get the precise tolerances required only in the final finishing.

The high feed milling is also very suitable for copying the uneven surface, and can be used efficiently for the milling and grinding of the cavity. For copying milling and cavity milling, the necessary tool diameter will be indicated in the application, so it is easy to choose the correct tool.

In the spiral interpolation milling, the high feed milling is suitable for machining large diameter hole, which can save the preprocessing or predrilling link. In addition, it is often used in milling and milling, especially when machining titanium alloys and other difficult materials such as light alloys.

Highfeed 2-2 cutting edges, single side blades

Cutter range 12-40 mm (0.5-1.5 in)

Use the LP blade type

Maximum cutting depth (by blade type) : LP05/0.65 mm, lp06/0.8mm

The selection of ISO M and S materials in small and medium machine tools

Highfeed 4-4 cutting edge blades

Cutter range 20-63 mm (1-2.5 in)

Use the LO blade type

Maximum cutting depth of 0.9mm

The selection of ISO P and K materials in small and medium machine tools

Highfeed 6-6 cutting edges, double-sided blades

Cutter range 40-160 mm (2-4 in)

Use 218.21 blade type

Maximum cutting depth of 1.8mm

Process ISO P and K materials in medium – sized machine tools

High feed mill – 3 cutting edge, single blade

Cutter range 16-208 mm (0.75-4 in)

Use the 218.19 blade type

Maximum cutting depth (by blade type) : 080/0.6mm, 100/0.7mm, 125HA/ 1.5mm, 160/1.8mm, 160C/ 2.5mm

Suitable for general processing applications

Cutting tool

We can provide a wide range of high efficiency ball head cutting tools for all materials and applications, from conventional and industry-specific cutting tools. Ball head cutter can provide better performance and higher reliability in profile milling applications.

Ball head K= 1-3 cutting edges, single side blades

Cutting tool range 16-40 mm (0.625-2 in)

90 degree type and HFA (lollipop)

An effective cutting edge

Ball head cutter K= 2-2 cutting edge, single side blade

Cutter range 12-50 mm (0.5-2 in)

Type 90 degrees

2 effective cutting edges

Taper ball cutter – 2 cutting edges, single side blades

Cutter range 12.7-25mm (0.5-1 in)

4 degree taper

2 effective cutting edges

Aluminum alloy copying milling cutter – 2 cutting edge, single side blade

Aeromaster high productivity cutter can provide the best performance in aluminum alloy groove milling, shoulder milling and cavity processing. These tools are specially optimized to achieve high speed machining and high metal cutting rate in aluminum alloy materials.

Used for aluminum alloy copying milling cutter – blade specification 12

Knife range 25-50 mm

Maximum cutting depth of 7.5 mm (0.295 in)

Excellent slope milling ability

Mirror polished blade

Used for the contour milling cutter of aluminum alloy – blade specification 22

Cutter range 32-100 mm (1.25-4 in)

Maximum cutting depth of 10 mm (0.393 in)

Excellent slope milling ability

Mirror polished blade

High in the milling cutter

High feed milling is a milling method that is three times faster than the traditional processing method.

It combines the small cut depth with the high feed amount per tooth, which can provide higher metal cutting rate, so more work pieces can be processed. The cutting force guides the spindle to the spindle, which means higher stability, less vibration and longer tool life. In addition, the high feed milling cutter eliminates the semi-finishing process and reduces the number of changing times, thus saving time.

 

cutter series

Suitable for conventional copying milling round blade cutter – single side blade

Our comprehensive round cutter series (r217/220.29) is an ideal choice for semi-finishing and rough machining of all the imitated milling applications and materials.

Circular blade cutter – blade specification 05

Tool range 10-20mm

Maximum cutting depth of 2.5mm (0.1 in)

Recommended groove milling depth 1 mm (0.04 in)

Round blade cutter – blade specification 06

Tool range 10-20mm

Maximum cutting depth of 2.5mm (0.1 in)

Recommended groove milling depth 1 mm (0.04 in)

Round blade – blade specification 07

Tool range 10-20mm

Maximum cutting depth of 2.5mm (0.1 in)

Recommended groove milling depth 1 mm (0.04 in)

Round blade – blade specification 08

Tool range 10-20mm

Maximum cutting depth of 2.5mm (0.1 in)

Recommended groove milling depth 1 mm (0.04 in)

Circular blade cutter – blade specification 10

Cutter range 20-50 mm (1-1.5 in)

Maximum cutting depth of 5 mm (0.197 in)

Recommended groove milling depth of 2 mm (0.079 in)

Circular blade – blade specification 12

Cutter range 20-50 mm (1-1.5 in)

Maximum cutting depth of 5 mm (0.197 in)

Recommended groove milling depth of 2 mm (0.079 in)

Round blade – blade specification 16

Cutter range 20-50 mm (1-1.5 in)

Maximum cutting depth of 5 mm (0.197 in)

Recommended groove milling depth of 2 mm (0.079 in)

Round blade – blade specification 20

Cutter range 20-50 mm (1-1.5 in)

Maximum cutting depth of 5 mm (0.197 in)

Recommended groove milling depth of 2 mm (0.079 in)

Suitable for conventional copying milling round blade – double – side blade

Circular blade – blade specification 12

Cutter range 32-100 mm (1.25-4 in)

Maximum cutting depth of 6 mm (0.236 in)

Recommended groove milling depth of 3 mm (0.118 in)

Up to 16 cutting edges

Ball head tool for mould processing